Ultrasonic
Transmitter SITRANS FUS060
 | SITRANS FUS060 is a transit time based transmitter designed for ultrasonic flowmetering with any sensor in the FUS inline series up to DN 4000. SITRANS FUS060 is engineered for high performance and is suitable for 1-, 2- and 4-tracks flowmeters. The transmitter type FUS060 is designed for remote installation in non-hazardous or hazardous areas. The transmitter is designed for use in a flowmeter system together with sensors type SONOKIT, SONO 3300 and SONO 3100. Transmitter SITRANS FUS060 Inquiry Sheet |
|
Transmitter SITRANS FUS080/FUE080
 | SITRANS FUS080 is a transit time based transmitter designed for ultrasonic flowmetering with any sensor in the FUS inline series SONOKIT, FUS380 and FUE380 up to DN 1200. The ultrasonic flowmeter transmitter SITRANS FUS080 comes as battery or mains powered version.The SITRANS FUS080 is designed to measure flow water applications. Download: Transmitter SITRANS FUS080/FUE080 Inquiry Sheet |
|
Sensor SONO 3300 with transmitter FUS060
 | The combination of SONO 3300 sensor and FUS060 transmitter is ideal for applications within the general industry. Measurements are independent of liquid temperature, density, pressure and conductivity. Transducers cannot be replaced. The main application for SONO 3300 ultrasonic flowmeters is to measure the volume flow of:
Download: Sensor SONO 3300 with FUS060 Inquiry Sheet |
|
Sensor SONO 3100 with transmitter FUS060
 | The combination of the SONO 3100 sensor and the FUS060 transmitter is ideal for applications where process shut-down is impossible during service and where there is a need for extreme high/low temperatures and pressures. Transducers can easily be changed without interrupting operation. SONO 3100 can optionally be delivered as a 4-track solution for absolute best performance and accuracy. The main application for SONO 3100 ultrasonic flowmeters is to measure the volume flow of:
Sensor SONO 3100 with FUS060 Inquiry Sheet |
|
SONOKIT
 | Installation of one, two or four transducer sets in existing concrete or steel pipes. SONOKIT is a transit time based ultrasonic flowmeter for retrofitting on existing pipelines. The kit includes all necessary parts and special tools to make the installation as 1- or 2-track flowmeter. The set is made for installation on empty pipes or pipes under pressure without process shut-down (hot-tap). Download: SONOKIT Inquiry Sheet |
|
Flowmeter FUS380/FUE380
 | The 2-track flowmeter SITRANS FUE380 comes as battery or mains-powered and is designed to measure water flow in district heating plants, local networks, boiler stations, substations, chiller plants and other general water applications. The flowmeter FUE380 is approved according to energy meter standards EN 1434 class 2, OIML R 75 class 2 and MID class 2. Metrological parameters are protected against manipulation. The type-approved flowmeter version is named SITRANS FUE380. For a standard flowmeter type FUS380 without a type approval, see separate FUS380 chapter. Technically, the meter types SITRANS FUS380 and SITRANS FUE380 are completely identical, only difference is the calibration limit and the type approval for custody transfer. Please see PDF in download section also. Download: Flowmeter SITRANS FUS380 Flowmeter SITRANS FUE380 Inquiry Sheet |
|
Thermal energy calculator FUE950
 | SITRANS FUE950 is a universal thermal energy calculator, which meets the requirements EN 1434 and has the MID approval for energy metering. SITRANS FUE950 has been developed for the SITRANS FUS380/FUE380 and alternatively MAG 5000/6000. SITRANS FUE950 is modular in construction and can by order be fitted with optional modules depending on the application. SITRANS FUE950 can be used for flow rates up to 9 999.9 m3/h. The FUE950 does not support the SITRANS FX, FC, FUS clamp-on. Download: Thermal energy calculator FUE950 Inquiry Sheet |
|
Ultrasonic retrofit flowmeter FUS880
 | The SITRANS FUS880 is a battery-powered irrigation flowmeter, designed for pipes measuring from DN 200 up to DN 1200 (8" up to 48") in diameter. The SITRANS FUS880 gives you the ability to install the flowmeter underground retrofitting onto existing pipelines. This ultrasonic transient time irrigation flowmeter is used for full pipe flow measurements. Pipe material may be PVC or concrete and pipe construction may be single wall or double wall, smooth or corrugated. The flowmeter produces a signal proportional to the velocity of the flow (flow rate) as the liquid flows past the ultrasonic sensors. SITRANS FUS880 has transducers in the flow (inline) which assures superior aides in accuracy and superior performance when compared to doppler or many other types of flow measurement systems. Download: Ultrasonic retrofit FUS880 Inquiry Sheet |
|
Thickness gauge
 | The thickness gauge is used to measure the wall thickness of the pipe that a clamp-on ultrasonic flowmeter is installed on. The wall thickness value is a vital factor in the flow computation model and a prerequisite for precise clamp-on ultrasonic flow measurement. When measuring any pipe wall thickness the thickness gauge can also be used as a stand-alone tool used to measure the wall thickness of any metallic or non-metallic pipe materials capable of acting as an ultrasonic wave conductor. The hand-held micro-processor controlled gauge is designed to measure the thickness of various metallic or nonmetallic pipes. Download: Thickness gauge Inquiry Sheet |
|
Flowmeter Clamp on FUS1010 Standard
 | SITRANS FUS1010 is the most versatile clamp-on ultrasonic flow display transmitter available today. It can operate in either Wide- Beam Transit time or Reflexor (Doppler) mode, making it suitable for virtually any liquid, even those with high aeration or suspended solids. SITRANS FUS1010 is available in single, dual and optional four path configurations, with your choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) explosionproof enclosures. Dedicated flowmeters are suitable for a wide variety of liquid applications, including those in the:
Flowmeter Clanp on FUS1010 Standard Inquiry Sheet |
|
Flowmeter Clamp on SITRANS FST020 Basic
 | SITRANS FST020 offers reliable flow measurement at a much lower cost than other clamp-on ultrasonic flowmeters, with flow rate accuracy of ± 1.0 % to 2.0 % for most applications. Dedicated flowmeter is a basic option for many clean liquid applications in the:
Flowmeter Clamp on FST020 Basic Inquiry Sheet |
|
SITRANS FUP1010 Portable
 | SITRANS FUP1010 clamp-on non-intrusive ultrasonic flow transmitter offers maximum versatility plus battery power for portable field use. It can operate in either WideBeam transit time or reflexor (Doppler) mode, making it suitable for virtually any liquid, even those with high aeration or suspended solids. SITRANS FUP1010 is available in single and dual channel or dual path configurations, with IP67 weatherproof enclosure. Portable flowmeters are suitable for a wide variety of liquid applications, including those in the:
SITRANS FUP1010 Portable Inquiry Sheet |
|
SITRANS FUP1010 Portable Check metering kit
 | The SITRANS FUP1010 check meter measures practically all conductive or non-conductive clean or moderately aerated liquids or liquids with suspended solids. This basic feature enables the perfomance check and verification of existing meters used in various water and wastewater applications such as:
SITRANS FUP1010 Portable check meting kit Inquiry Sheet |
|
SITRANS FUE1010 (Energy)
 | SITRANS FUE1010 is a highly accurate clamp-on non-intrusive ultrasonic flow transmitter for revenue grade thermal energy sub-metering and energy efficiency distribution monitoring, with a real time coefficient of performance (COP) for HVAC systems. SITRANS FUE1010 is available in single and dual channel or dual path configurations, with your choice of IP65 (NEMA 4X) dedicated wall mount or IP40 (NEMA 1) portable enclosures.
SITRANS FUE1010 (Energy) Inquiry Sheet |
|